[Healeys] Fwd: Replacing knobs on switches

[Derek Job]

---------- Forwarded message ----------
From: Derek Job <derek.c.job at gmail.com>
Date: Mon, Aug 1, 2011 at 6:55 PM
Subject: Re: [Healeys] Replacing knobs on switches
To: Jean Caron <vintage_roadster_restoration at hotmail.com>


Thanks guys,

Ive noticed the holes so hopefully they will come off as described. Im going
out to visit the car tomorrow so I'll give it a try

Derek

  On Mon, Aug 1, 2011 at 6:32 PM, Jean Caron <
vintage_roadster_restoration at hotmail.com> wrote:

>  Derek:
> Normally there is a small round hole at the bottom of the knob. Take a
> small nail, insert it in that small hole, prees on it and it will free the
> knob, you can then pull it out.
>
> Jean Caron
>
> > Date: Mon, 1 Aug 2011 18:14:22 +0200
> > From: derek.c.job at gmail.com
> > To: Healeys at autox.team.net
>
> > Subject: [Healeys] Replacing knobs on switches
> >
>  > My car has a non-standard light switch knob and a very old wiper knob
> with
> > no markings. I am replacing them with new knobs that i have purchased.
> >
> > Are these knobs just glued in place, and if so do I just 'cut' the old
> ones
> > off?
> >
> > Derek
> > _______________________________________________
> > Healeys at autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/vintage_roadster_restoration@hotmail.com