[Healeys] penetrating oil

[Jose Vicente Vargas]

They were rusted in a lab and the numbers is the amount of torque required to
loosen them.



Sent from my iPad


On Apr 25, 2011, at 8:03 AM, DANIEL WILLS <dndwills at verizon.net> wrote:

> I tried to send this before but made a mistake. Here it is:
>
> A friend sent me this the other day.The Machinist's Workshop did a study of
oils in 2007 and found the following:
>
> none - 516 lbs
> WD 40 - 238
> PB Blaster - 214
> Liquid Wrench - 127
> Kano Kroll - 106
> ATM - acetone mix - 53
>
> They tested on rusty "devices", don't know how they made each equal.
> Dan
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jvvmusme@yahoo.com