[Healeys] trans buffer

[healeymanjim at hansencc.net]

andrea, when i rebuilt the trans in the bn6, i did not know about that buffer and did not replace it.  about a month later it cracked in half (it was some kind of plastic) allowing the high gear rod to move forward enough to allow balls and springs to fly all over inside.  needless to say, had to pull trans and try to figure out problem.  i replaced the plastic piece with leather or rubber (cannot remember exactly) and it has worked fine ever since.  make sure to measure thickness and replace with a material that will not compress too much allowing shift rod to move too far forward.  hjim