[Healeys] BN2 oil seal crankshaft front

[Alan Seigrist]

Jose -

Make sure your motor has sufficient crankcase ventilation.  If the
ventilation pipe has been closed off for some reason you'll get
leakage.  Adding a PCV valve might help also.  Try that first?

Alan

On Tue, Apr 19, 2011 at 9:56 AM, Jose Vicente Vargas <jvvmusme at yahoo.com>
wrote:
> I just fired my engine after a total rebuilt and have a terrible oil leak (
> more like a spill) in the front oil seal in the crankshaft. I used the moss
> oil seal that is made of felt.
>
> Is there a substitute for this felt oil seal ?
>
> Should Ii run the engine for how long praying that the leak stops....
>
> Thanks
>
> Jose
>
>
> Sent from my iPad
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com