[Healeys] BN2 Trunk Seal

[Rich C]

The shallower side which has a more squared up edge goes to the outside 
perimeter of the lid, with the wider angle toward the inside. When gluing 
into place, make sure there is no pull exerted on the corner curves or it 
will pull away later on.

Rich
--------------------------------------------------
From: "Josi Vicente Vargas" <jvvmusme at yahoo.com>
Sent: Thursday, September 30, 2010 4:19 PM
To: <healeys at autox.team.net>
Subject: [Healeys] BN2 Trunk Seal

> The BN2 trunk seal has a specific shape. On one side it has a shallow 
> figure
> and
> on the other side it looks like a piramid. How should I glue the seal ??
> Thanks,
> Jose
> Josi Vicente Vargas
> Musmi
>
>
> Tel. (571) 321 3740
> Cel. (57) 311
> 288 3401
> Skype: jovivago
>
>
> www.musme.net
>
>
> Bogota, Colombia
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net