[Healeys] offset bracket for the cold air box question

[Jim LeBlanc]

In inches the measurements on my bracket are 2 3/8, 1 1/2 and 1
 
The cold air box has about 1/4 inch clearance from the frame without the 1/8
carburetor spacers.
 
The bracket is the original piece.
 
Regards,
 
Jim LeBlanc
1956 Factory M

--- On Mon, 9/27/10, Tadeusz Malkiewicz <tadeusz.malkiewicz at plusnet.pl>
wrote:


From: Tadeusz Malkiewicz <tadeusz.malkiewicz at plusnet.pl>
Subject: [Healeys] offset bracket for the cold air box question
To: healeys at autox.team.net
Date: Monday, September 27, 2010, 6:45 AM


Hello,

Could any of 100M owners tell me how deep is the bracket offsetting the
left-hand shroud support?

Mine is 2" but I think it should be 2.75", otherwise the cold air box does
not clear the shroud support. There is also a possibility I am doing
something wrong..


Best, tadek
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jim_leblanc@yahoo.com