[Healeys] Carb cleaning

[Bob Spidell]

  Thanks for all the advice, Alan and others.

I got two of these for a little more than the cost of one 'camp & damper assembly' from Moss.  I hope to cannibalize 
parts if/as I need them.

BTW, the our BN2 is a 100M so it has H6 carbs but, yes, I can see that the float bowls and levers are different.  
Hopefully, the floats aren't as I might need them someday.


bs


On 9/16/2010 7:07 PM, Alan Seigrist wrote:
> Bob
>
> The best stuff is the big gallon tin of GUNK Carb Cleaner.  They
> should sell it at NAPA:
>
> http://www.gunk.com/prod_photo.asp?img=LG_CC3K.jpg
>
> If you are talking about polishing, a wheel polisher works very well.
>
> Incidentally, with the TR2 H6 carbs are different and you will need to
> swap over your old H4 float chambers and choke levers.
>
> Regards,
>
> Alan
>
> On Fri, Sep 17, 2010 at 7:03 AM, Bob Spidell<bspidell at comcast.net>  wrote:
>>   Listers,
>>
>> I bought some H6 carbs (from a TR2/3 originally) on eBay for parts for my
>> BN2.  The carbs are intact, but they are pretty gunked-up.  What is the List
>> wisdom regarding cleaning up aluminium without scratching or deforming?
>>
>> TIA,
>> Bob
>>
>> --
>> *******************************************************************
>> Bob Spidell           San Jose, CA            bspidell at comcast.net
>>
>> *******************************************************************
>> _______________________________________________
>> Healeys at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************