[Healeys] Carbs overflowing on 60 BN7

[Alan Seigrist]

Bob -

My experience is the rubber ones seal better, but then don't last more
than 5-ish years then start leaking.  The brass ones will last longer,
but if they aren't made correctly they will leak.  The Grose jets work
best, provided fuel is clean.

You might be having a problem with too much fuel pressure with the
brass jets - what type of fuel pump are you using?

Alan

On Tue, Sep 14, 2010 at 11:06 AM, Bob Spidell <bspidell at comcast.net> wrote:
>  On a similar note, our BN2's front carb leaks.  It has new, brass-tipped
> needle valves--anybody having trouble with these as well (the tank and fuel
> lines are new/cleaned)?
>
>
> bs