[Healeys] Soda Blasting Small Parts

Don Hardie healeynut at yahoo.com.au
Sun Oct 31 00:12:32 MDT 2010


I'm glad to see that I'm not the only one that thinks outside the box, or
should 
I say inside the distributor.

Don
BN1
OZ
________________________________
From: Len and/or Marge Hartnett
<thehartnetts at earthlink.net>
To: Healey Mail List <healeys at autox.team.net>
Sent: Sun, 31 October, 2010 4:02:26 PM
Subject: Re: [Healeys] Soda Blasting
Small Parts

The article on Pertronix wire chafing could be of interest to
those with 
Pertronix installed.  I was concerned about this problem when I
first installed 
the unit on my Healey.  My solution was to install a small
wire tie around the 
wires inside the distributor right at the 'grommet' .
This prevents the wires 
from ever being pulled through the grommet and
rubbing against the rotor.

(The Other) Len
Vacaville, CA, USA
1967 AH 3000
MkIII, HBJ8L39031


----- Original Message ----- From: "HealeyRick"
<healeyrick at yahoo.com>
To: <healeys at autox.team.net>;
<spridgets at autox.team.net>
Sent: Saturday, October 30, 2010 3:00 PM
Subject:
[Healeys] Soda Blasting Small Parts


> Saw this cheap DIY soda blaster on
another forum.  Looks like it works great
> for carbs:
http://www.aircooledtech.com/tools-on-the-cheap/soda_blaster/
> 
> Rick
_______________________________________________
Healeys at autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeynut@yahoo.com.au


More information about the Healeys mailing list