[Healeys] Making brake lines

[Mark LaPierre]

Hey John.   The copper/Nickel pre cut sets from Moss make this job a breeze. 
Easily shaped and
even reshaped,  and all the work is done for you except for the install.  I 
will buy them again for all
my future restorations.  No flaring necessary.

Mark

----- Original Message ----- 
From: "john spaur" <jmsdarch at sbcglobal.net>
To: <healeys at autox.team.net>
Sent: Thursday, October 28, 2010 5:12 PM
Subject: [Healeys] Making brake lines


> If someone knows the wall thickness for 3/16" stainless steel brake line 
> material would you please send me the information?
>
> In addition, when I read the instructions for the double flare tool, that 
> I need, it states not to use the tool on stainless steel. Has any one used 
> the standard tools on stainless steel? What are your experiences?
>
> I presume that the stainless steel is not good for the durability of the 
> flare tool.
>
> Thank you,
> John
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/lapierrem@sbcglobal.net