[Healeys] I give up: how do I remove the differential drain plug?

[I Erbs]

Get some 7/8 square stock, use an open end spanner or socket on the bar and
turn as needed

It's Erbs
DIGS-4 Solutions
Please excuse Typos. Sent from my Droid cellular PDA
On Oct 20, 2010 10:25 AM, "Danny Eskenazi" <danny.eskenazi at gmail.com> wrote:
> Greetings,
>
> I replaced the front seal in my BT7's differential and I thought topping
it
> off would be the easy part. Turns out not so! Some googling has revealed
> that it is a 7/8" square drive plug. The only advice I've seen is to make
my
> own tool by grinding down a 1/2" drive extension to fit. Well, I don't
have
> a grinder. Surely there's an easier way? Doesn't SOMEONE make a tool for
> this?
>
> Thanks,
>
> -Danny
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/eyera3@gmail.com