[Healeys] Fix for seat rail studs?

[Bob Spidell]

  IIRC, the rails are galvanized.  If you weld on them be sure to use a respirator in a well-ventilated area--the fumes 
will be very toxic.

http://www.anvilfire.com/iForge/tutor/safety3/index.htm


bs



On 10/12/2010 7:18 AM, Jean Caron wrote:
> Rick:
>
> I use bolt of the same size but prior to welding them in place, I grind off
> about half of the thickness of the head and then weld them in place.
>
>
>
> Jean Caron
>
>
>>
>> While removing the T nuts from the bottom of the seat rail, the studs
> passing
>> from the bottom of the rail, through the floor and secured by the T nuts
>> snapped off. They are flat headed. Anyone know a fix for this?
>>
>> Thanks,
>>
>> Rick
>>
>>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************