[Healeys] Fuel Gauge not working

[Jonas Payne]

1. No continuity between terminals on gauge (should I?).
2. Have Contuniuty between "cold terminal" and sending unit.
3. Have Continuity between "hot terminal" and ground
4. Checked resistance on sending unit rheostat - it goes up and down as it
should with motion on the float arm.
5. Have continuity between "cold terminal" and ground when green / black wire
is connected the sending unit, and none when the wire is disconnected from the
sending unit.

Jonas Payne
PBR
Cell:   (702) 358-5084

"This email and any attachments are confidential and intended solely for the
use of the individual or entity to whom they are addressed.  If you have
received this email in error please contact the sender(s) at (702) 269-2007
and delete all copies from your system.  It is not the intent of the sender to
solicit any person or business.  Please note that any opinions in this email
are solely those of the author and do not necessarily represent those of Thor
Construction, Incorporated.  Finally, the recipient should check this email
and any attachments for the presence of viruses.  The company accepts no
liability for any damage or loss caused by any virus transmitted by this
email."