[Healeys] aluminum oil pan

[Charlie O'Connors]

The instructions that came with the aluminum oil pan I purchased from Moss
said to cut he tube connecting the screen pickup to the pump 1/2 inch.  Did
as instructed and the oil pan fits fine.

Charlie

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Wayne Schultz
Sent: Friday, November 26, 2010 9:17 AM
To: healeys at autox.team.net
Subject: [Healeys] aluminum oil pan

Hi

     I am having trouble fitting an after market aluminum oil pan to a 
3000 engine.  The inside of the oil pan is hitting the corner of the oil 
pump preventing the bolts from lining up with the block. Has anyone seen 
this before?  If I removed about 1/8 " or so from the corner of the pump 
I could probably get the pan to fit.


                                                                         
                Thanks
 
Wayne
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/charlieoc@comcast.net