[Healeys] Bump box screws

[Tadeusz Malkiewicz]

Rich, what about BN2??..


From: "Rich Chrysler" <richchrysler at quickclic.net>
Subject: Re: [Healeys] Bump box screws

John, 

There was a change point with the Mk 2 BT7 where they installed 1/4" NF
captive welded nuts to the side wall of the inner wheel arches to receive
the horizontal 1/4" hex head bolts (backed up by lock washers and flat
washers) from the wheel arches. The 1/4" Phillips head screws went down
through the holes outboard of the seat pans and through the ears of the bump
stop boxes, anchored by flats, locks and nuts on the underside.

Rich