[Healeys] removing pulley

Rich Chrysler richchrysler at quickclic.net
Sun Nov 7 16:53:39 MST 2010


Robert, 

You should be able to see a square surface on the back side of the pulley.
It requires a very slim wrench to reach in there and hold the square while
the hex nut is removed. On the other hand, an air impact wrench should be
able to shock/loosen the nut anyway. Another option is to hold the pulley
with a chain type vise grips in the groove of the pulley and again loosen
the nut with an air impact gun.

Rich

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Robert Duquette
Sent: Sunday, November 07, 2010 5:43 PM
To: Healeys
Subject: [Healeys] removing pulley

Anyone car to tell me how you hold the generator pulley, without damaging
it,
to remove the nut?


More information about the Healeys mailing list