[Healeys] Fuel Lines - 65 BJ8

Bernard Cristalli bcrist at club-internet.fr
Mon May 31 08:08:32 MDT 2010


Greg,
One only advice, don't try to weld it.
B


Greg Mandas a icrit :
> In the One Thing Leads to Another department:
>
> While working in and around the fuel pump replacing the chassis harness, I felt a cool sensation on my wrist, much like the wind blowing through your hair on ride with the top down, which I'm NOT going to be doing for awhile because I now have a pinhole leak in the fuel line. 
>
> Fortunately, the leak is in the hard line between the pump and the engine. 
>
> While on the phone with Moss I decided to order the tank-to-pump line and replace them both but it's NA. 
>
> Any suggestions on replacing the front line? It looks like I can easily remove the original intact and use it as a template.
>
> The original line is held in with P-clips, not the "Clip - Pipe to Chassis" in the catalogue. I'm assuming it's simply a model difference and correct on my car.
>
> Most importantly, what do we do if the tank-to-pump line fails? It's just as old and fragile.
>
> It looks like for the second year in a row I'll be driving the Blazer to Brits by the Sea next week.
>
> Greg
> 65BJ8
> 97 Chevy Blazer LT
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/jagxk120@gmail.com


More information about the Healeys mailing list