[Healeys] BN7 HEAT! Ouch

[Ron Fine]

I used some closed cell foam tape (sticky on one side) I got from the local 
hardware store.  comes in lots of sizes.  problem solved.

Ron Fine


----- Original Message ----- 
From: "scott willis" <ahpowered at hotmail.com>
To: <healeys at autox.team.net>
Sent: Saturday, May 29, 2010 11:24 AM
Subject: [Healeys] BN7 HEAT! Ouch


> Hi folks,
> Ouch says my foot. I can't get a good seal on my old tunnel. Is there a
> material of choice to put between the tunnel and the bulkhead on the sides 
> to
> make an actual seal? There is scalding hot air blowing out of where the
> extension tunnel meets the bulkhead on the sides and I have no material 
> there.
> The extension panel and the tunnel also have a poor seal. Any material to 
> put
> there?
>
> I bought an Extreme Dynamat door kit from a local stereo shop to put on 
> the
> floor but it does not seem like the right stuff.
>
> Thanks for any suggestions
>
> Scott Willis
> Mashed 60 BN7 AH Club USA
> 59 MGA
> 66 E-Type FHC
>
> http://www.bgeuroclassics.org
> BG Euro Classics Car Club President
> Bowling Green, KY
>
>
>
> _________________________________________________________________
> The New Busy is not the old busy. Search, chat and e-mail from your inbox.
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/ronfineesq@earthlink.net