[Healeys] rocker shaft assembly

[Dave Porter]

Rocker shaft nuts are 25 ft lbs. heat the old copper washers to max butane
torch heat, air cool, reinstall

frogeye at porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
1954 BN2  1959 AN5
Porter Custom Bicycles

cars:
 www.britishcarforum.com/portercustoms.html
gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

blog: http://porterbikes.com/


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of David Z
Sent: Thursday, May 27, 2010 3:59 PM
To: Healeys at autox.team.net
Subject: [Healeys] rocker shaft assembly

I purcased a replacement rocker shaft assembly for my BJ8 due a bit lower
than
normal oil pressure, oil in the rear air cleaner and squirting up from a
couple of the rocker arms. What is the suggested torque for the rocker arm
nuts? I know to be careful about applying too much torque to the oil supply
line. Can I re-use the copper washers on either side of the banjo fitting,
or
do I need to get new ones?

Thanks!
David Z.
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com