[Healeys] Speedo cable

[Dan S]

Bob,

  According to Norman Nock's Tech Talk pg 149 it should be 3/8" from the end
of the outside armour to the end of the cable or the the length from the end
of the bushing to the end of the cable is 5/16".

Dan Serrao
1963 BJ7
Fountain Hills, AZ

People who don't read the newspaper are uninformed, those who read the
newspaper are misinformed........ Mark Twain




> Date: Wed, 26 May 2010 18:24:54 -0700
> From: bspidell at comcast.net
> To: healeys at autox.team.net
> Subject: [Healeys] Speedo cable
>
> Anyone know the exact length of the part that sticks out past the upper
> 'bearing;' i.e. the length of the end that sticks into the speedo?
>
> TIA,
> bs
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell at comcast.net
>
> *******************************************************************
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jobu53@hotmail.com

_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
:en-US:WM_HMP:042010_3