[Healeys] 100-4 cylinder head oil feed pipe

[John Soderling]

Allen,
Try British Car Specialists.  They usually have hard-to-find stuff.
Vrooom vrooom,
John

--------------------------------------------------
From: "allen c miller jr" <acmiller at mhcable.com>
Sent: Monday, May 10, 2010 5:15 PM
To: "Healey List" <healeys at autox.team.net>
Subject: [Healeys] 100-4 cylinder head oil feed pipe

> Moss supplies the banjo bolt and banjo fitting for the cylinder head 
> assembly
> on 100-4's, but not the tapered thread union. they do carry the entire 
> array
> for the 100-6 2-port head.
>
> can you substitute the tapered thread union for 100-6's in place of the 
> one
> which was supplied on 100-4's, or is it one of those thread transitions 
> that
> makes it impossible? alternately, can you modify a brake caliper union to 
> fit
> in?
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/bighealey@astound.net