[Healeys] tonneau install procedure -- BT-7

[Richard Ewald]

YMMV I guess. The last Robbins top I installed was on an MGB.  
Installed it snug but not tight. A month later I had to redo where it  
attached at the header rail as the top was now floppy loose from the  
wind buffeting it. I took up about 1/2" all accross the header rail.

Sent from my iPhone

On May 9, 2010, at 5:38, jerry wall <jwbn6hrdtp at gmail.com> wrote:

> you can double that in spades for tops (hoods).  install it as tight  
> as you
> can get it in the summer (when you don't use it) and then get ready  
> for the
> fun when you try to make it stretch in the winter. Peter is correct,  
> the fit
> should be judicious.