[Healeys] dumb question ...

[John Vrugtman]

Interesting, since just this week I changed needles in my 64 from UN 
(rich) to the standard needle and had to adjust
the jets more than a complete turn of the screw.  Otherwise, it would 
not run at idle.

John
BJ8s

On 5/7/2010 4:46 PM, Dan Stromquist wrote:
> Bob:
> I asked the same question and was told the needle circumference enriched the
> mixture only at higher RPMs and that at idle or near idle the needle was the
> same as standard.
> Dan
>
>
>
> -----Original Message-----
> From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
> On Behalf Of Bob Spidell
> Sent: Thursday, May 06, 2010 4:24 PM
> To: healeys at autox.team.net
> Subject: [Healeys] dumb question ...
>
> A 'UN' (rich) SU needle should enrichen the mixture compared to a standard
> needle, correct?
>
>
> bs
>
> --------------------------------
> Bob Spidell - San Jose, CA
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/dan@warner-associates.com
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/javrugtman@htcnet.org