[Healeys] center shift rubber boot

warthodson at aol.com warthodson at aol.com
Mon Mar 29 18:13:53 MST 2010


Alan,
That is my understanding of the way they were originally installed, too. What
seems strange is that the mold lines only show on the side that would be
visible if installed as original. I am hoping that someone sells a boot with
the mold lines on the underside when installed as original.
Gary




-----Original Message-----
From: Alan Seigrist <healey.nut at gmail.com>
To: warthodson at aol.com
Cc: ahbn6 at verizon.net; healeys at autox.team.net
Sent: Mon, Mar 29, 2010 7:53 pm
Subject: Re: [Healeys] center shift rubber boot


Gary -


The consensus is the centre shift boot went nipple down at the factory, but I
have found that when combined with the little chrome fixing ring from Moss,
that it works MUCH better nipple up.  It will last much longer nipple up.  I
think the one on my BJ8 now has been going 10 years with no rips or tears.
Previously with it installed nipple down, it was failing annually.


Alan

'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8



On Tue, Mar 30, 2010 at 2:02 AM, <warthodson at aol.com> wrote:

John,
Thanks, I will order one from them. Did you install the boot with the bellows
up & the center (the part around the shift lever) down or the other way
around?
Gary







-----Original Message-----
From: John Sims <ahbn6 at verizon.net>
To: warthodson at aol.com; healeys at autox.team.net
Sent: Mon, Mar 29, 2010 12:41 pm
Subject: RE: [Healeys] center shift rubber boot


My BN6 was modified years ago to take a center shift tranny. I bought a boot

ast summer from Moss that does NOT have the mold parting lines that you

ention.
John Sims, BN6
berdeen, NJ


ttp://www.healey6.com

----Original Message-----

rom: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]

n Behalf Of warthodson at aol.com

ent: Monday, March 29, 2010 1:04 PM

o: healeys at autox.team.net
ubject: [Healeys] center shift rubber boot
I recently purchased a rubber boot for a center shift transmission from

ictoria British which they sourced from AH Spares. It has a lot of mold

arting lines in it on the side that is visible when installed as original.

nterestingly, the underside does not show these mold lines at all. Does

nyone know of a source for this boot that does not have these lines on the

isible side? Also, out of curiosity, were these lines visible on the

riginal
oots?
ary Hodson
______________________________________________
ealeys at autox.team.net

onate: http://www.team.net/donate.html

uggested annual donation  $12.75

rchive: http://www.team.net/archive

orums: http://www.team.net/forums

nsubscribe/Manage:


ttp://autox.team.net/mailman/options/healeys/ahbn6@verizon.net
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com


More information about the Healeys mailing list