[Healeys] Turn Signals

[Ron Ray]

Thanks Kees.
 
How does the turn signal switch achieve the ground that is illustrated in
the wiring diagram.  None of the 4 wires exiting the end of the steering
column are ground wires.
The reason I ask is because the car in question has an aftermarket steering
wheel.
 
Ron
 
 
 
-----Original Message-----
From: Oudesluys [mailto:coudesluijs at chello.nl] 
Sent: Sunday, March 28, 2010 4:49 PM
To: Ron Ray
Cc: 'healeys'
Subject: Re: [Healeys] Turn Signals
 
First check and clean all earth connections, souns a bit like an 
earthing problem somewhere along the line.
Check the connections on your switch using a bulb/battery or ohm/volt 
meter. Do not trust the "experts" without question.
Check the wattage of the bulbs used. If these are not correct ,systems 
may not work properly
Kees Oudesluijs
NL
 
 
Ron Ray schreef:
> Folks,
>  
> We are having trouble determining the cause of some turn signal issues on
a
> friend's 1960 BN7.  The car is near the end of a frame up restoration so
all
> components are new or rebuilt.