[Healeys] clutch problem

[Peter Schauss]

I had a similar problem and found that the hole in the master cylinder
pushrod where the clutch pedal linkage attached was worn to almost
double the original size.

Peter Schauss
1963 BJ7
1980 MGB

On Wed, Mar 24, 2010 at 10:42 PM,  <healeymanjim at hansencc.net> wrote:
> i only have about 1500 miles on the bn6, but have noticed it seems to be
getting harder to shift, the clutch begins to engage as soon as i lift my
foot, and the pedal must go clear to the floor to disenge.  the pedal actually
stops about a half inch from the floorboard when depressed.  everything is new
except clutch fork, pushrod and pin.  just a little slop at fork when clutch
is not depressed.  any ideas on where to start looking for a fix.   hjim
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rpschauss@gmail.com