[Healeys] clutch problem

[Alan Seigrist]

Sounds to me like you need to bleed the clutch slave cylinder.  What happens
when you pump the clutch, does it work better?  You may need to check your
clutch lines for an air leak.

Alan

'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8


On Thu, Mar 25, 2010 at 10:42 AM, <healeymanjim at hansencc.net> wrote:

> i only have about 1500 miles on the bn6, but have noticed it seems to be
> getting harder to shift, the clutch begins to engage as soon as i lift my
> foot, and the pedal must go clear to the floor to disenge.  the pedal
> actually stops about a half inch from the floorboard when depressed.
>  everything is new except clutch fork, pushrod and pin.  just a little slop
> at fork when clutch is not depressed.  any ideas on where to start looking
> for a fix.   hjim