[Healeys] follow up question about carbs

[warthodson at aol.com]

Correction. The support needs to be modified to clear the bottom of the carb,
not the air cleaner.
Also, get the heat shield.
Gary Hodson






-----Original Message-----
From: warthodson at aol.com
To: eyera3 at gmail.com; healeys at autox.team.net
Sent: Wed, Mar 17, 2010 12:37 pm
Subject: Re: [Healeys] follow up question about carbs


If possible, make sure you get all the throttle & choke linkage & the air
leaners. I think you said you are getting the intake manifold with the carbs.
o you have a cam equal to the BJ8 cam?
he angled chassis support that goes from the frame near the front suspension
o the pedal box will need to be modified to clear the HD8 air cleaners.
ary Hodson


-----Original Message-----
rom: I Erbs <eyera3 at gmail.com>
o: healey help <healeys at autox.team.net>
ent: Wed, Mar 17, 2010 10:28 am
ubject: [Healeys] follow up question about carbs

f I go with the BJ8 set up will there be an issue with port sizes? by that
mean, will the 2" manifolds match the intake port size or will there be a
ep down? I do not want to pull the head and open up the ports. If a
smatch, what will the effect be? Obviously more turbulence, but will it be
ough to negatively impact induction?
hanks,
-
Erbs
rtland, OR
_____________________________________________
aleys at autox.team.net
nate: http://www.team.net/donate.html
ggested annual donation  $12.75
chive: http://www.team.net/archive
rums: http://www.team.net/forums
subscribe/Manage:
ttp://autox.team.net/mailman/options/healeys/warthodson@aol.com
______________________________________________
ealeys at autox.team.net
onate: http://www.team.net/donate.html
uggested annual donation  $12.75
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/warthodson@aol.com