[Healeys] K&N air filter

Carlos Cruz healey3000bn7 at yahoo.com
Wed Mar 17 08:57:09 MST 2010


Kees,

Thanks for the feed back.  I like the look but didn't know how effective it was.  Do you think it would be more effective if a 90 degree elbow was added and it was up so that the oil would drip back down the pipe into the valve cover?  I appreciate the insight.

Cheers,
Carlos Cruz




________________________________
From: Oudesluys <coudesluijs at chello.nl>
To: Carlos Cruz <healey3000bn7 at yahoo.com>
Cc: Bob Haskell <rchaskell at earthlink.net>; AlanB <bluehealey at gmail.com>; Healeys List <healeys at autox.team.net>
Sent: Wed, March 17, 2010 2:08:30 AM
Subject: Re: [Healeys] K&N air filter

I have this fitted to my car. It keeps dirt from entering the crankcase 
but it gets soked in engine oil and eventually drips oil.
Kees Oudesluijs
NL

Carlos Cruz schreef:
> All,
>
> Tom's Import Toys (http://tomsimport.com/new/parts/parts.asp?sect=35&new=1) offers a nice looking breather option you might want t consider for only $10.  No financial interest.
>
> Cheers,
> Carlos Cruz
>
>
>
>
> ________________________________
> From: Bob Haskell <rchaskell at earthlink.net>
> To: AlanB <bluehealey at gmail.com>
> Cc: Healeys List <healeys at autox.team.net>
> Sent: Tue, March 16, 2010 6:57:58 PM
> Subject: Re: [Healeys] K&N air filter
>
> Alan,
>
> I like the idea of using a PCV valve.  Not sure how to fit one to the rear tri-carb manifold.  Anyone do it?
>
> The original Coopers filters fitted to the tri-carb are roughly 5" in diameter for about 20 square inches.  If I got the correct equation (new word for the day: frustum of cone) from of my copy of Machinery Handbook, the K&N 59-9320 filter has an area of around 25 square inches.  Ought to be adequate, but I don't have a flow bench to confirm.
>
> The dual carb setups have a larger air filters, so I would think/agree that a filter larger than the 59-9320 would be required.
>
> Cheers,
>
> Bob
>
> AlanB wrote:
>  
>> Team.
>> I have been in touch with K&N and they identify Part number 56-9247 as the
>> most appropriate for a 3000 with two carbs.
>> http://www.knfilters.com/search/product.aspx?Prod=56-9247
>> It is a classic pancake filter with a diameter of 6" and a depth of 2". A
>> bit bigger than the 59-9320 but then we have almost double the displacement
>> of an MGB.  The backing plates are blank and have to be opened up to match
>> the HD6 or 8 carbs. That gives the opportunity to offset the rear one lower
>> to clear the shroud.
>>
>> As for the breather hole, my vote is don't bother. Fit a PCV valve as
>> detailed in Norman's Tech Talk. A superb and discrete mod that completely
>> eliminates the oil leaks caused by crankcase pressure. I fitted the air
>> filters and PCV to my BJ8 and will be doing the same again to my modified
>> BN4 which will soon be fitted with a slightly breathed on 3000 engine. DWR
>> cam, gas flowed head, HD8's.
>> Read about the PCV mod at
>> http://www.nfahc.co.uk/PCV/
>>  _____________________________________________
>> (______________ Alan Bromfield _______________)
>>       (______ \____1957-BN4____/ _______)
>>           (_________________________)


More information about the Healeys mailing list