[Healeys] BJ7 top and dash support

[Rich C]

Hello Frank,

There will be a mounting hole just to the right of the steering column (LHD 
car) and along the bottom of the dash, to the immediate left of the 
instrument illumination slide switch, where a mounting screw will come up 
through the bottom edge and through the hole in the end of the dash support, 
to take a flat, lock and nut on the inside of the dash.

The anchor tabs for the top cantilever springs come off the edge of the 
inner sill as shown in this picture.

Rich Chrysler

--------------------------------------------------
From: "Frank Edwards" <logical2 at hotmail.com>
Sent: Tuesday, March 09, 2010 7:17 PM
To: <healeys at autox.team.net>
Subject: [Healeys] BJ7 top and dash support

> I am assembling my BJ7 and I have a piece marked "dash support"  I belive 
> I
> see where the front end goes but where does the dash end attach to the 
> dash?
>
> I replace the sills on my car and I now have no idea where the two top 
> assist
> springs are attached at the bottom, can someone give me a hint?
>
> I know someone will come through with the answers and I am, as always very
> gratefull for the help.
>
>
>
> Thanks much,
>
>
>
> 62' BJ7
>
> 61' Bugeye
>
> 69' Midget
>
>
>
> Frank R. Edwards 570-784-4662 logical2 at hotmail.com
>
>
>
> _________________________________________________________________
> Hotmail: Powerful Free email with security by Microsoft.
> http://clk.atdmt.com/GBL/go/201469230/direct/01/
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net

[demime 1.01d removed an attachment of type image/jpeg which had a name of 3000 Rdstr Detail 0010.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of Greg Grant 049.jpg]