[Healeys] door-scuttle seal

[Mark LaPierre]

They used a special split rivet and washer.   You can pick split rivets up 
at  an Ace hardware but they have a shinny surface where the original appear 
to be copper.   The archives should have the  install instructions
posted somewhere.

Mark

----- Original Message ----- 
From: "Bob Abbott" <thehealeyguy at gmail.com>
To: <healeys at autox.team.net>
Sent: Friday, March 05, 2010 6:37 AM
Subject: [Healeys] door-scuttle seal


>I purchased a door-scuttle seal to use on a BT7 restoration. Now I don't
> know how to orient it into position or what type of screws to use to 
> attach
> them. Can anyone send a picture/diagram/explaination of how these pieces 
> fit
> to the car.
> TIA,
> Bob
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/healeys/lapierrem@sbcglobal.net