[Healeys] Fw: Rear Hub Trouble
John Snyder
helyjohn at cablespeed.com
Thu Mar 4 10:25:29 MST 2010
I agree. One of the threaded holes for the manifold studs in the head for
an engine I was rebuilding was stripped. Had an old bottle of Loctite Stud
& Bearing Mount. Squirted a bunch of it into the Head, screwed the stud in
and waited 24 hours. It worked! Was able to tighten the nut down firmly!
Saved the Head.
John Snyder
>
> On Wed, Mar 3, 2010 at 9:19 PM, <go2ghill at aol.com> wrote:
>
>> My rear studs have come loose in the hub and I need help on how I could
>> repair. Replacement hubs don't seem to be available, so advice on an
>> alternative
>> approach is appreciated.
>>
>> Greg Hill
>> '58 BN6
More information about the Healeys
mailing list