[Healeys] Rear Hub Trouble

Alan Seigrist healey.nut at gmail.com
Wed Mar 3 23:38:47 MST 2010


Greg -

If the studs are loose in the hub, even after tightening the nuts, there's
not much you personally can do.

You can, however, probably go to a machine shop and have them put in a soft
steel sleeve which then can re-catch on the ridges on the stud.  Otherwise
you can get a used hub from all the usual suppliers like British Car
Specialists or Cape.

Incidentally, if you want a new unit, you can get them from AH spares.  If
you sit tight, the UK pound should take a bit of a dive over the next couple
of weeks and it will be even cheaper in USD:

http://www.ahspares.co.uk/products/productdetail.aspx?GUID=340c1546-923b-43a0-8f18-30470b417d7a
<http://www.ahspares.co.uk/products/productdetail.aspx?GUID=340c1546-923b-43a0-8f18-30470b417d7a>
Alan

'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8


On Thu, Mar 4, 2010 at 1:19 PM, <go2ghill at aol.com> wrote:

>  My rear studs have come loose in the hub and I need help on how I could
> repair. Replacement hubs don't seem to be available, so advice on an
> alternative
>  approach is appreciated.
>
> Greg Hill
> '58 BN6


More information about the Healeys mailing list