[Healeys] A bit of tuning advice
jpayne at ThorCon.net
Tue Jun 29 11:26:03 MDT 2010
I did a TR3 once and failed to properly seat the intake manifold. It appeared
tight at the top, but had 1/16" gap at the bottom where it connected to the
head - thus no vacumm.
Similar problem in running that you describe.
Director of Preconstruction
PH: (702) 269-2007
Fax: (702) 269-7095
Cell: (702) 358-5084
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Eric (Rick) Wilkins
Sent: Tuesday, June 29, 2010 10:10 AM
To: Paul Leeks
Cc: healeys at autox.team.net
Subject: Re: [Healeys] A bit of tuning advice
Sounds to me like a intake manifold leak (or other source of lean-out.
Throttle bushes, blown carb gaskets, etc.
Healeys at autox.team.net
Suggested annual donation $12.75
"This email and any attachments are confidential and intended solely for the
use of the individual or entity to whom they are addressed. If you have
received this email in error please contact the sender(s) at (702) 269-2007
and delete all copies from your system. It is not the intent of the sender to
solicit any person or business. Please note that any opinions in this email
are solely those of the author and do not necessarily represent those of Thor
Construction, Incorporated. Finally, the recipient should check this email
and any attachments for the presence of viruses. The company accepts no
liability for any damage or loss caused by any virus transmitted by this
More information about the Healeys