[Healeys] Restoration question

[pennell at cox.net]

Herb,

On the restos I have done I assembled the two parts of the inner together (using plug welds) first.  Then these are put into position relative to the outriggers and the rear and front fender wells.  Once in then I added the outer sills or rockers.  I cannot imagine how the rockers could be properly positioned without the inners in and the doors temporarily hung.

Keith

---- Herbert Miller <hgmiller3 at qwest.net> wrote: 
> I am replacing the inner and outer sills on my BT7.  The hinge pillar and
> shut pillar are still in place. The question is do you weld the inner and
> outer together and then install, or is necessary to first install  the inner
> and then the outer? With the pillars in place, if I install the inner then I
> can't get the outer in place. Any advice is welcome.
> 
> Herb Miller
---- Herbert Miller <hgmiller3 at qwest.net> wrote: 
> I am replacing the inner and outer sills on my BT7.  The hinge pillar and
> shut pillar are still in place. The question is do you weld the inner and
> outer together and then install, or is necessary to first install  the inner
> and then the outer? With the pillars in place, if I install the inner then I
> can't get the outer in place. Any advice is welcome.
> 
> Herb Miller