[Healeys] Master Cylinder

David Nock healeydoc at sbcglobal.net
Fri Jun 18 09:21:10 MDT 2010

Check for the free play adjustment. If the piston is not returning  
all the way to the stop it will not allow the master cylinder to get  
more fluid into the system.

David Nock
British Car Specialists
Stockton Ca 95205


On Jun 18, 2010, at 12:52 AM, Keith Bailey wrote:

>     I am experiencing problems with my (suspect) Master Cylinder on  
> my BN1
>     With the Master Cylinder on the bench in a vise with the reservoir
> connected
>     to inlet with oil in it and the outlet connected to a pipe  
> which is
> blanked of
>     there is hard pressure. When fitted back to car there is no  
> pressure when
> attempting
>     to bleed brakes all the wheel cylinders are new.I feel sure the  
> problem is
> in the Master
>     Cylinder but lost for answers
>       Regards Keith
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net

More information about the Healeys mailing list