[Healeys] Not Healey - Triumph TR6 Master Cylinder

john spaur jmsdarch at sbcglobal.net
Tue Jun 1 20:16:10 MDT 2010

If the lines are steel you could have a cracked line, which is very 
difficult to see, where it enters the cylinder. With the line fitting 
tightened shoot some air into the top of the fitting where the line 
enters. If you see brake fluid check the line for a crack.


At 10:15 AM 6/1/2010 -0700, Jonas Payne wrote:
>He and I have bench bled it, installed it on the car and tried to bleed it but
>consistently get air from both sides of the front.  The rears are fine.

More information about the Healeys mailing list