[Healeys] Ignition Wire Set

[Tom Felts]

FWIW, I just bought a set of wires for my E that had the end caps that are, for the lack of another word, swaged on the wires---they are made in England and say so on the tops of the caps.  They are metal wire core.  I will replace the Champion screw-on caps I have been using and use the sealed end cap ones.

These would work perfectly for the Healey.

If anyone wants to know the source, let me know off line.

Tom

---- bighealey3k at aim.com wrote: 

=============
Most auto parts stores have 6 cyl. tractor ignition wire sets with the spark
plug ends already crimped on including the rubber boots.  That is the only way
I know of to get solid wire core ignition wires already made up.  Use resistor
spark plugs to eliminate ignition noise in you car radio if needed and for the
car next to you on the road.

Larry
'67 BJ8







-----Original Message-----
From: Charlie O'Connors <charlieoc at comcast.net>
To: Healeys at autox.team.net
Sent: Sat, Jul 31, 2010 1:52 pm
Subject: [Healeys] Ignition Wire Set


I want to replace the ignition wire set on my 1960 BT7.  I was looking at
he Cobalt set sold by Moss as well as the Magnecor wire sets, but they
ppear to be more for later model 3000s.  Any suggestions on ignition wire
ets for the 1960 Austin Healey?

Charlie O'Connors
Havana, Florida
1960 Austin Healey 3000 BT7
1960 Austin Healey Sprite
______________________________________________
ealeys at autox.team.net
onate: http://www.team.net/donate.html
uggested annual donation  $12.75
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/tomfelts@windstream.net