[Healeys] Ignition Wire Set

[Bob]

I believe that it was mentioned on the list before that TSC (Tractor 
Supply Co.) a national chain had
sets for both the 4 and 6 cylinder tractors.  I got a 4 cylinder set 
that was quite well made and
cheap too, but that was a few years ago.    There is a TSC about 20 
miles from me here in NJ.

Bob
55 BN1

On 7/31/2010 7:08 PM, bighealey3k at aim.com wrote:
> Most auto parts stores have 6 cyl. tractor ignition wire sets with the spark
> plug ends already crimped on including the rubber boots.  That is the only way
> I know of to get solid wire core ignition wires already made up.  Use resistor
> spark plugs to eliminate ignition noise in you car radio if needed and for the
> car next to you on the road.
>
> Larry
> '67 BJ8
>
>
>
>
>
>
>
> -----Original Message-----
> From: Charlie O'Connors<charlieoc at comcast.net>
> To: Healeys at autox.team.net
> Sent: Sat, Jul 31, 2010 1:52 pm
> Subject: [Healeys] Ignition Wire Set
>
>
> I want to replace the ignition wire set on my 1960 BT7.  I was looking at
> he Cobalt set sold by Moss as well as the Magnecor wire sets, but they
> ppear to be more for later model 3000s.  Any suggestions on ignition wire
> ets for the 1960 Austin Healey?
>
> Charlie O'Connors
> Havana, Florida
> 1960 Austin Healey 3000 BT7
> 1960 Austin Healey Sprite