[Healeys] Ignition Wire Set

[Alan Seigrist]

Charlie -

I would not recommend any modern type wire set for any Healey unless
you purchase a TR6 dizzy cap (fits on BJ8 dizzy) or replace the dizzy
with a Pertonix/123/Mallory dizzy.

Your best bet is to make up your own wires using bumblebee wire or any
other solid metal core wire.  The cap on the 6-cyl works best with
solid metal wire core.  If it's any kind of suppressed wire it will
fail with that screw cap.

Alan

On 8/1/10, Charlie O'Connors <charlieoc at comcast.net> wrote:
> I want to replace the ignition wire set on my 1960 BT7.  I was looking at
> the Cobalt set sold by Moss as well as the Magnecor wire sets, but they
> appear to be more for later model 3000s.  Any suggestions on ignition wire
> sets for the 1960 Austin Healey?
>
>
>
> Charlie O'Connors
>
> Havana, Florida
>
> 1960 Austin Healey 3000 BT7
>
> 1960 Austin Healey Sprite
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>

-- 
Sent from my mobile device