[Healeys] FW: PCV valve- from Pep Boys

John Sims ahbn6 at verizon.net
Wed Jul 28 11:38:18 MDT 2010


I received the following from our friend, Ed Driver. The article on his site
to which he refers can be found at:

http://www.vintage-sportscar-touring.ca/technical/PCV.html

There are other very interesting items on his site that are good reads and
full of information.

John Sims, BN6
Aberdeen, NJ
 
http://www.healey6.com


-----Original Message-----
From: E.A. Driver [mailto:edriver at sasktel.net]
Sent: Wednesday, July 28, 2010 1:20 PM
To: John Sims
Subject: Re: [Healeys] PCV valve- from Pep Boys

Hi John

I am truly amazed, this setup for a BJ8 with photos and measurements has
been on my web site for the last four years.

Keep up the good work mate

Kind regards
Ed
Saskatoon


>
>
> -----Original Message-----
> From: healeys-bounces at autox.team.net
> [mailto:healeys-bounces at autox.team.net]
> On Behalf Of Bob Spidell
> Sent: Wednesday, July 28, 2010 12:04 PM
> To: Stephen Hutchings
> Cc: healeys at autox.team.net
> Subject: Re: [Healeys] PCV valve- from Pep Boys
>
> Use the smaller tapped and plugged hole at the rear of the manifold.
>
> bs


More information about the Healeys mailing list