[Healeys] [Healeys} still too hot

Ron Mitchell healeyron at yahoo.com
Mon Jul 26 06:14:02 MDT 2010


Thanks Ken,

That is why I am rebuilding the Distributor today to make sure
the pivots aren't 
too loose which could be preventing the specified
centrifical advance of 35 
degrees.

Any idea on what the Water Pump Pulley
dia should be for a 1962 MkII 3000?

See you at Encounter I hope.
Ron  
________________________________
From: ah <kbeck100 at rcn.com>
To: Ron Mitchell
<healeyron at yahoo.com>; healeys at autox.team.net
Sent: Mon, July 26, 2010 7:21:55
AM
Subject: Re: [Healeys] still too hot...

Ron:  Check your timing at total
advance. Run the engine to 2500 or so and 
see what your timing is. Total
should be around 32 degrees adv. Above 36 is 
pushing it

Ken BEck


More information about the Healeys mailing list