[Healeys] HELP - No Clutch

[Oudesluys]

John,
Just clean and rebuild both the slave and master cylinder using new 
seals. Clean up the bores with wet&dry 1000 or hone them. If the bores 
are not perfectly smooth any more, renew them, they are cheap items. A 
relatively simple job. If one is gone the other is not far away from 
failure either.
Kees Oudesluijs
NL


John Soderling wrote:
> On the way home to Walnut Creek, Ca from a great week at Healey Rendezvous
> 2010 in Eugene, Oregon, I lost my clutch ( actually it was Erika the Red, my
> 100-six that lost her clutch) about 150 miles from home.  When I checked the
> dual outlet clutch/brake tank, the clutch system had pumped additional fluid
> back into the tank to where it actually overflowed a little.
>
> So is it more likely a failed master cylinder or slave cylinder?  I'm thinking
> the master, but not sure.  Thanks.
>
> Vrooom vrooom,
> John
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
> ------------------------------------------------------------------------
>
>
> Geen virus gevonden in het binnenkomende-bericht.
> Gecontroleerd door AVG - www.avg.com 
> Versie: 9.0.830 / Virusdatabase: 271.1.1/2983 - datum van uitgifte: 07/05/10 08:36:00