[Healeys] fire wall heat shields

[Bob Haskell]

Mike,

P/N is AHB9065.  It commenced at chassis # 13751.

Bob

Michael Salter wrote:
> If anyone could send me the part number of that tri-carb heatshield i
> probably have a DXF drawing of it.
> 
> On Wed, Jan 20, 2010 at 2:25 AM, Greg Wilkinson <
> gregwilkinson at roadrunner.com> wrote:
> 
>> I have a neighbor with a Tri-carb. It might be a while before I see his car
>> though (he doesn't store it at his house). If someone wants to do a pencil
>> sketch with the dimensions, I can do up a drawing like the BJ8 ones.
>>
>>
>> -----Original Message-----
>> Somebody needs to come up with the pattern for the tricarb under floor heat
>> shield panel. It's similar to that of the BJ8 but is about 5 1/2" longer at
>> the back of the panel with different spacings. I suspect the one for the
>> BJ7
>> may be similar. The BJ8 one probably had to be shorter at the back edge to
>> clear the pair of exhaust mounts that mount on studs through the floor just
>> ahead of the rear left outrigger.
>>
>> Rich Chrysler
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as msalter at precisionsportscar.com
>>
>> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> You are subscribed as rchaskell at earthlink.net
> 
> http://www.team.net/archive