[Healeys] 100 BN2 Emergency 4 way flasher
Alan Seigrist
healey.nut at gmail.com
Sun Jan 17 16:50:23 MST 2010
Thomas -
If you've purchased the Lucas 4 way flasher kit, it is actally fairly
easily installed.
Take the power lead off a brown wire (unswitched fused power) (off the
fuse box) and then run 4 seperate wires to each of the outward bound
light leads from the flasher relay.
Finally the power cutout circuit in the Lucas switch should have the
brake switch circuit routed through the cutout (rather than the
flasher in the Lucas instructions in the box), this keeps the brake
switch from overiding the whole thing if you are rolling to a stop.
I can give more specifics in a couple days...
Alan
On 1/17/10, T+ B Willig <willig at wtnet.de> wrote:
> Hi,
>
>
>
> I need some advice how to install a emergency 4 way flasher on my BN2. I am
> a bit scared to burn the expensive flasher relay.
>
>
>
> Thanks
>
>
>
>
>
> Thomas Willig
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
More information about the Healeys
mailing list