[Healeys] Thermostat replacement

[Craig Rice]

Michael,

I might add that it is helpful to keep the 1/16 dia hole in the thermostat 
diaphragm unclogged, add a stainless cotter pin. Loop end in up position.

Craig Rice    (Indiana)
BN1 & BN2
----- Original Message ----- 
From: <awgertoo at aol.com>
To: <healeys at autox.team.net>
Sent: Saturday, January 16, 2010 7:17 PM
Subject: [Healeys] Thermostat replacement


> Well I was all set to start the job this afternoon and got called away on
> an emergency so it will have to wait till  tomorrow possibly or Monday 
> more
> likely.  I just thought I should let you know as I suspected that so  many
> of you were hanging there on the edges of your seats and did not want  you
> to miss a night's sleep (I guess that's a mixed metaphore unless  someone
> sleeps in a chair....)
>
> More when it occurs.  Thanks again for all the good input.
>
> Best--Michael Oritt
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as craigsuerice at iquest.net
>
> http://www.team.net/archive