[Healeys] King Pin with needle bearings

[PG]

I just put the trunion in a vice and gave the kingpin (with nut protecting
top treads a blow with a hammer (used wood to buffer).

Pual

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Bob Spidell
Sent: Wednesday, January 13, 2010 11:36 AM
To: Drew Philippo
Cc: Healeys at autox.team.net
Subject: Re: [Healeys] King Pin with needle bearings

I think a small gear puller would work: 

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=8832 


bs 


-------------------------------- 
Bob Spidell - San Jose, CA 

----- Original Message ----- 
From: "Drew Philippo" <dphilippo at gtp-eng.com> 
To: Healeys at autox.team.net 
Sent: Wednesday, January 13, 2010 11:26:55 AM GMT -08:00 US/Canada Pacific 
Subject: [Healeys] King Pin with needle bearings 

I tried this one last winter and I was unable to get the trunnion off of the

kingpin. I didn't have a lot of time to fool with it so after a weekend of 
messing with it I put the whole thing back to the way it was and let it 
wait. Does anyone have any suggestions for separating the two parts while on

the car? 



Thanks, 

Drew 

65 BJ8 
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as britishcars at shaw.ca

http://www.team.net/archive