[Healeys] King Pin with needle bearings
Neil Anderson
neilandcustom at gmail.com
Mon Jan 11 22:25:27 MST 2010
Bob,
Not to be a smart a**, but you have heard of u-joints, haven't you?
Neil Anderson
-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Bob Spidell
Sent: Monday, January 11, 2010 8:07 PM
To: sales at justbrits.com
Cc: 4 - Healeys
Subject: Re: [Healeys] King Pin with needle bearings
What's the advantage to these?
I know, it should be obvious, but I've heard it's not a particularly
good idea to use roller bearings where the parts don't rotate
completely; i.e. the parts rock back and forth on the same limited
surface, possibly wearing grooves (if the parts/bearings don't rotate
completely, it subjects one part of the bearing to the most wear).
Specifically, I heard this about using needle roller bearings on cam
rockers.
bs
Sales at " Just Brits " wrote:
> << Sometime in the past someone on the list had mentioned
> that there is a king pin setup for the big Healeys that uses
> needle bearings instead of bronze bushings.
> What I need is the supplier name and URL. >>
>
> I am in same 'boat' as Bob is Steve, don't have
> in stock and I also expect in around 2 weeks
> <sigh>.
>
> Ed
> Please visit MY site at:
> www.justbrits.com
> _______________________________________________
--
*******************************************************************
Bob Spidell San Jose, CA bspidell at comcast.net
*******************************************************************
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as neilandcustom at gmail.com
http://www.team.net/archive
More information about the Healeys
mailing list