[Healeys] Clutch Alignment Tools - AH100

[John Harper]

Bob

The alignment tools I have used and those called up in the official tool 
list do not get concerned with the spline. They work on the smallest 
diameter of the clutch plate.

I have measured the ones that I use

The pilot is 0.740"

BN1     0.808"

BN2     0.915"

Regards
>
>Moss shows different clutch alignment tools for the BN1 and BN2. To be 
>expected as the clutch discs are different part numbers. The pilot 
>bearing is the same for both.
>
>I believe the pilot diameter is 3/4".  How about the spline diameter 
>and the number of splines for the BN1 and BN2 gearbox input shafts?
-- 
John Harper