[Healeys] 100-6 engine block

[Geatros]

Hi Richard and Healey folks ,

I've heard that the 100-6 engines when bored out to 3000 specs makes for a 
better  cooled engine than a factory 3000 engine due to water jacket casting 
around the cylinder walls .

I've aslo heard that many Healey racers have used these engines bored out to 
3000 specs due to better cooling .

Has anyone on the  list heard this rummor?

Kenny
Vancouver BC


----- Original Message ----- 
From: "richard mayor" <mayorrichard at hotmail.com>
To: "healeys" <healeys at autox.team.net>
Sent: Saturday, January 02, 2010 7:23 PM
Subject: [Healeys] 100-6 engine block


>A question for the list. I have a 100-6 bare engine block, bored .020, with
> main caps. Is this even worth putting on ebay?  I got it with some other 
> bits
> I purchased -  I'm tempted to haul it to the scraper. Is there any demand 
> for
> a 26C motor?  What sayesth the listees, or is it listoids?
>
> Richard Mayor
> BN7L-466  Vintage Racer
> Portland, Oregon
>
>
>
> _________________________________________________________________
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
> http://clk.atdmt.com/GBL/go/171222985/direct/01/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as geatros at shaw.ca
>
> http://www.team.net/archive